DIN 13164 Standard Wholesale: What European Distributors Must Check Before Ordering
A German retailer and a Czech fleet operator ask for a quote on the same day. Both want a car first aid kit. Your supplier offers one pouch, one price and one piece count. Before you combine the orders, ask for two things from each customer: the vehicle category and the specification they will use to accept the shipment. Germany's road regulations reference DIN 13164, while Czechia sets out its own contents schedule by vehicle category. That distinction can change which dressings you buy before it changes a single word on the label.
Quick answer: For a DIN 13164 standard wholesale order, put the exact edition, item specifications, packaging, destination-language artwork and agreed remaining shelf life on the purchase order. Then check a production sample against those terms and the destination country's vehicle rules. A headline piece count cannot tell you whether six compresses are packed in sterile pairs or whether a mask meets the specified type.
DIN 13164 Standard Wholesale: What the Mandate Actually Requires
Two documents answer different buying questions. DIN 13164:2022-02 identifies the German technical specification for a vehicle first aid kit. Section 35h(3) of Germany's StVZO sets the carriage duty for covered vehicles and expressly references the January 1998 or January 2014 editions as minimum benchmarks. A retailer can still order the February 2022 configuration. Write that edition into the contract so the supplier, receiving team and retailer all inspect against the same list.
DIN 13164:2022-02 Contents Checklist for a Wholesale Sample
Open one finished retail unit and keep its contents list alongside the items. The quantities below are per kit. Where a size or product standard matters, record it on the inspection sheet as well as the quantity. The checklist draws on the published 2022 inventory and industry guidance.
| Item | Quantity and specification | What to check on the sample |
|---|---|---|
| Adhesive tape | 1 roll, 5 m x 2.5 cm | Confirm length as well as width. |
| Adhesive dressings | 4 dressings, 10 x 6 cm | Measure one. A narrow strip serves a different purpose. |
| Fingertip and finger dressings | 2 fingertip dressings, 5 x 4 cm, and 2 finger dressings, 12 x 2 cm | Open the assortment and identify both shapes. |
| Adhesive strips | 2 at 1.9 x 7.2 cm and 4 at 2.5 x 7.2 cm | Count each width separately. |
| Sterile dressing packs | 1 small, 2 medium and 1 large, DIN 13151 sizes K/M/G | Read the size and sterile marking on each wrapper. |
| Sterile dressing sheet | 1, 60 x 80 cm, DIN 13152-A | Check the dimensions and intact individual pack. |
| Fixation bandages | 2 rolls at 6 cm wide and 3 at 8 cm, DIN 61634 | Separate the widths before counting. |
| Wound compresses | 6, each 10 x 10 cm, sterile-packed in pairs | Expect three sealed pairs. |
| Emergency blanket | 1, 160 x 210 cm | Read the unfolded dimensions. |
| Triangular bandage and scissors | 1 DIN 13168-D bandage and 1 pair of DIN 58279-A 145 scissors | Match both model specifications to the bill of materials. |
| Medical examination gloves | 4 single-use gloves, EN 455 Parts 1-3 | Count individual gloves and check the supplier specification. |
| Skin-cleansing wipes | 2 | Verify intended use on the sachets. |
| Medical face masks | 2, at least Type I under EN 14683 | Match the mask model to its product documentation. |
| Printed material | 1 first aid guide and 1 contents list | Open the finished pouch and check both inserts and their languages. |
The easiest discrepancy to miss is a change in the unit of count. "Three compress packs" can be correct if each contains two sterile compresses. "Four gloves" means four individual gloves. Ask every bidder to quote in the units shown on your inspection sheet. That makes a price difference worth investigating visible before you order.
DIN 13164 Standard Wholesalers vs Suppliers: Checking Stock and Certificate Scope
A wholesaler with finished stock may be able to dispatch a small order quickly. A factory producing to order may offer more control over pouch dimensions, artwork and language inserts. Ask both sellers the same questions so their quotes are comparable.
| Before you approve | Ask the seller to provide |
|---|---|
| Stock and shelf life | Available units by lot, earliest component expiry in each lot and minimum remaining shelf life on arrival. |
| Evidence for the SKU | The dated bill of materials, model number, photos of the finished label and the documents supporting each conformity claim. Match model names and manufacturers across the documents. |
| Mixed shipments | Quantities by country version, cartons per variant, pallet layout and a packing-list sample showing how the warehouse distinguishes language variants. |
| Reorders and substitutions | A written change-approval process for masks, dressings, gloves, inserts and pack artwork. Keep the approved sample and revision number. |
A certificate for the supplier's quality management system answers a narrower question than a model-specific declaration or a finished-kit contents check. For a kit supplied as a medical procedure pack, also identify who assembled it and which documentation applies to the pack and its components.
Supply DIN 13164 Standard Kits Across EU Markets: Country Variations
| Destination | What changes the order |
|---|---|
| Germany | For covered passenger vehicles, check StVZO 35h. For a retail listing that promises the 2022 edition, inspect against that edition's contents as a separate contractual check. Motorcycles are expressly excepted from 35h(3). |
| Austria | Drivers and riders must carry first aid material suitable for wound care, protected from dust and dirt in a robust container. The Austrian government recommends ONORM V 5101. If the buyer orders that configuration, ask for its own contents schedule. |
| France | The government's ordinary passenger-car equipment guidance identifies items such as a high-visibility vest and warning triangle. It provides no basis for advertising a DIN 13164 kit as compulsory for every French passenger car. Describe the kit by its contents and intended use. |
| Czechia | Decree 153/2023 distinguishes motorcycle kits and vehicle kit sizes. Size I applies to the ordinary four-wheel passenger-car case. For example, its schedule calls for three ready-made dressings with one pad. Compare the complete Czech schedule line by line before allocating German stock. |
For each destination, give the local distributor the actual pouch artwork, contents list and instructions to approve. Record the language revision and the customer's shelf-life terms against the SKU. An agreement to accept stock with 36 months remaining, for example, is a commercial acceptance term. State whether that period starts at dispatch or delivery.
Wholesale DIN 13164 Standard Kits: Carton, Labelling and Expiry Rules
Suppose a supplier quotes 24 kits per carton. Twelve contain German inserts and twelve contain Czech inserts, but both pouches look identical from the outside. The purchase order may balance perfectly while the warehouse sends the wrong version to both customers. Agree on a visible variant identifier before approving a mixed carton.
For receiving, specify the SKU, language revision, units per carton, lot code and carton number on the shipping mark. Ask for a photograph showing where the lot and any expiry marking appear on the retail unit. If the buyer requires the earliest component expiry on the outer carton, define that calculation and print location in the artwork approval. Keep shipping marks distinct from the medical-device information applicable to the retail pack. EU guidance also addresses the placement and readability of the UDI carrier for systems and procedure packs.
DIN 13167 First Aid Kit and Motorcycle Variants for Distributors
DIN Media lists DIN 13167:2014-01 for first aid material carried on motorcycles. Give a DIN 13167 first aid kit its own SKU and contents schedule. A compact pouch can look right for a motorcycle while containing a passenger-car assortment or a retailer's abbreviated selection. Inspect the sample against the motorcycle specification named in the order.
The sales claim also changes at the border. Germany excepts motorcycles from the carriage duty in 35h(3). Austria includes single-track motor vehicles in its first aid carriage requirement. Czechia specifies a motorcycle kit for category L vehicles, with stated exceptions. A regional motorcycle distributor therefore needs a vehicle-and-country field in its product data, even when several retailers buy the same pouch.
CSN 07 0703 and Other National Standards: Where They Differ
Remove CSN 07 0703 from vehicle first aid kit specifications. The Czech Standards Agency identifies that number as a standard for boiler rooms with gas-fired equipment. The applicable Czech vehicle-kit reference for this buying guide is Decree 153/2023. Correcting the number before tender avoids asking suppliers to certify a claim unrelated to the product.
| Reference in a tender | Vehicle or application | How to handle counts and markings |
|---|---|---|
| DIN 13164:2022-02 | Motor vehicle first aid kit | Use the dated contents checklist above. Match the edition claim to the inspected SKU. |
| DIN 13167:2014-01 | Motorcycle first aid material | Request the motorcycle-specific schedule and verify the edition before printing the pouch. |
| ONORM V 5101 | Austrian reference recommended by the government | Obtain the specified edition if the tender requires it. Check the statutory container protection separately. |
| Czech Decree 153/2023 | Motorcycle kits and vehicle kit sizes I-III | Select the vehicle category first, then use its quantity column. Passenger transport vehicles also have placement and identification provisions. |
| "SN 734190" | Intended Swiss reference unverified | Ask the buyer for the issuing body, full title and edition. Hold the piece count and printed claim until the reference is identified. |
China DIN 13164 First Aid Kit Sourcing: Documentation and Customs
For a China-origin shipment, have the EU importer and customs broker review the finished product being declared. The tariff heading commonly associated with first aid boxes and kits is 3006 50. Confirm the current TARIC classification for the actual shipment. If an automotive emergency kit also includes a warning triangle, safety hammer or emergency light, give the broker the full bundle specification before reusing a code from a first-aid-only shipment.
Ask for four document groups before paying the balance:
- Product specification. Obtain the model-specific bill of materials, standard edition, approved sample record and final artwork by destination.
- Medical-device documentation. Identify the legal manufacturer of each applicable device and obtain the relevant EU declarations of conformity. Where the assembled kit falls under MDR Article 22, request the pack producer's statement and identification. The conformity route depends on how the products are combined and marketed.
- Shipment traceability. Request the finished-kit lots, component lot and expiry information, inspection results and a contact for investigating a defective lot.
- Customs paperwork. Reconcile the commercial invoice, packing list, origin information, consignee details and broker-confirmed commodity code with the goods actually packed.
Custom DIN 13164 First Aid Kit and Custom DIN 13164 Standard Programs
For a private-label order, approve the contents first, then the design. Give the supplier a marked-up drawing showing the logo area and the space reserved for product identification, traceability and instructions. Ask the EU importer to review the named economic operators and the regulatory effect of selling under your brand before the artwork goes to print. The pack producer's responsibilities depend on the arrangement.
For a broader car emergency kit OEM/ODM project, quote the medical pouch and roadside tools as separate lines. A retailer can then change its safety hammer with emergency light, upgrade the carry bag or compare tool suppliers while keeping the approved medical contents identifiable. Include both lines on the final bundle specification.
Frequently Asked Questions
How many DIN 13164 versions should a wholesale buyer distinguish?
Three editions matter to the purchasing decision described here: January 1998 and January 2014 appear in the German road regulation, and February 2022 is the technical edition used for the contents checklist above. Specify the year and month on the order.
Can one DIN 13164 first aid kit be sold throughout Europe?
A shared SKU may work for several destinations after you verify the vehicle category, local requirements, product information and intended sales claim for each. For example, a German-market kit and a Czech Size I kit need separate contents checks even if both are sold to passenger-car owners.
How can a distributor add its brand to a custom DIN 13164 standard kit?
Start with a dated contents specification. Approve the pouch artwork, destination-language inserts and regulatory details on one finished sample. Attach that sample revision to the order and require written approval for component or artwork changes.
Request a Model-Specific Quote from ORI POWER
Send your destination countries, vehicle types, order quantities, language versions and minimum remaining shelf life. Ask for the dated DIN 13164 contents sheet, a DIN 13167 comparison if motorcycles are in scope, and the compliance documents for each quoted SKU.
Explore ORI POWER's ARKPRE Drive vehicle kits and request a model-specific quote.
Contact amychen@ori-power.com to discuss your DIN 13164 wholesale program.
Email the TeamSources and Editorial Basis
Reviewed November 6, 2026. This guide references public regulatory and standards sources including Germany's StVZO, DIN Media for DIN 13164 and DIN 13167, Austrian, French and Czech government guidance, and EU customs and medical-device documentation (EUR-Lex and the European Commission). It does not reproduce the full licensed standard text.
